This is a Kyosho 32322W Mini-Z RWD MR-03 Readyset Honda NSX 130R White RC Car
This is Kyosho Mini-Z RWD Honda NSX 130R White w/ KT-531P Radio Readyset RTR Car Kit. The biggest topic is the adoption of the new Syncro KT-531P transmitter. In addition to the steering trim and throttle trim, the dual rate and LED control functions are equipped, and a sponge is equipped as standard on the steering wheel to emphasize the fit during control. In addition, it comes with a factory-finished body that satisfies the joy of decorating with the same finish as the display model. The chassis also follows the proven MR-03, so not only running performance but also durability and reliability are origami. In addition, by adopting a new board with a completely new control program, linear handling is realized for steering, and the behavior when the optional gyro unit (MZW431) is installed has more controllable characteristics. I will. Since it is the most suitable package for "first R/C car", why not start R/C life from this series?
Features:
A new series that uses the newly developed Syncro KT-531P transmitter that can be set in various ways.
The steering feel has been dramatically improved by adopting a new board with a completely new control program.
he factory-finished body has a high-scale finish comparable to the display model.
Full bearing specifications with a total of 7 ball bearings, which were previously optional.
All MINI-Z Racer bodies can be installed. *A motor case and diff gear assembly corresponding to the body to be installed are required separately.
Uses a unique front suspension "VCS" that brings out the optimum camber change according to the suspension stroke.
An optional gyro unit (MZW431) can be installed.
Specifications:
Overall Length: 167.5mm
Overall Width: 75mm
Overall Height: 46.0mm
Wheelbase: 98mm (LL)
Chassis: MR-03 RWD
Motor Mount: MM
Front wheel offset narrow +1.5mm (for RWD)
Rear wheel offset Wide +1.5mm (for RWD)
Includes:
Factory completed chassis
Painting/marking factory completed plastic body
Syncro KT-531P 2.4GHz transmitter
Front tread change parts set
Adjustment front suspension spacer
6T/7T/8T/9T pinion gear
Wheels Wrench
Pinion removal tool
Spare wheel nut
Pairing stick
Tire/wheel included
Mini pylon
Requires:
AAA alkaline or NiMH batteries for chassis (4 pcs)
AAA alkaline batteries for transmitter (4 pcs)